AMX MXA-MPL handleiding


Bekijk hier de AMX MXA-MPL handleiding. Het bekijken en downloaden van deze Audio/video-converter handleiding is geheel gratis.

Installation Guide
MXA-MPL Modero X Series
Multi Preview Live
The MXA-MPL Modero X Series
Multi Preview Live (FG5968-10) is a touch panel
accessory that displays an HD video stream on Modero X Series Touch Panels when used in
conjunction with a high-definition (HD) Enova DVX All-In-One Presentation Switcher or
Enova DGX Digital Media Switcher. The MXA-MPL accepts digital video inputs over a DVI
Multi-Format connector and converts them to a video stream. The MXP-MPL also supports
all of the features of the MXA-MP, displaying up to 10 JPEG preview images on a Modero X
Series touch panel. The MXA-MPL makes it easy for users to identify quickly what is
currently being displayed by up to 10 source devices.
Note: For full functionality, the MXA-MPL may be used with the Enova series media
switchers and Modero X Series touch panels. The MXA-MPL may not be used with
previously released AMX touch panels or switchers.
For more information on installation and configuration, refer to the MXA-MP/MXA-MPL
Operation/Reference Guide, available at
Common Applications
Use the MXA-MPL to preview a live video stream or snapshot of the content from a source device
before switching to that source.
Supports one (1) HD digital video stream or up to 10 preview images.
Updates all 10 preview images sequentially or one image continuously.
Streams digital video sources to a Modero X Series Touch Panel
Seamlessly interconnects between a Modero X Series Touch Panel and an Enova
DGX or Enova DVX.
Product Specifications
Rebooting the MXA-MPL
To reboot the MXA-MPL, press and hold the Reset button (FIG. 1) for one second.
Configuring the MXA-MPL
Configuring the MXA-MPL into a network requires modification of the device’s corresponding
NetLinx files via NetLinx Studio and the associated touch panel pages via TPDesign 4.
Documentation of the available commands may be found in the Modero X Series
Programming Guide, available at
Resetting the MXA-MPL to Factory Defaults
To reset the MXA-MPL’s configuration settings to its factory defaults:
1. Press and hold the Factory Reset button (on the front panel) for about 5 seconds.
2. The Power LED will blink three times. At this time, release the Factory Reset button.
To reset the MXA-MPL’s firmware from its current version to its factory default version:
1. Press and hold the Factory Reset button (on the front panel) for about 10 seconds.
2. At about the 5-second mark, the Power LED will blink 3 times. Keep holding the
Factory Reset button. At the 10-second mark, the Power LED will blink 7 times at a
faster rate. At this time, release the Factory Reset button.
Connecting the MXA-MPL to a Network
Since the MXA-MPL works to transmit HD video and images from an Enova switcher to a
Modero X touch panel, it needs to be connected between the switcher and the touch panel.
To connect the touch panel to the MXA-MPL:
1. Insert the incoming network connection cable from the Enova switcher to the upper
Ethernet In RJ-45 connector (FIG. 1).
2. If the touch panel is not panoramic (MXD/T-1000, MXD/T-700, MXD-430), connect an
outgoing Ethernet cable from the MXA-MPL’s Ethernet Out RJ-45 connector to an
AMX-certified high-power Power over Ethernet injector. Do not apply power until the
installation is complete.
3. If the touch panel is a panoramic model (MXD/T-1900L-PAN or MXD/T-2000XL-PAN),
outgoing power to the touch panel may be supplied via the MXA-MPL’s 2-pin
connector output (FIG. 1) or through another source. Do not apply power until the
installation is complete.
MXA-MPL Specifications
Power Requirements: MXA-MPL only: 120VAC at 170ma (20W)
MXA-MPL with touch panel: 120VAC at 410ma (50W)
Start-Up Inrush Current: 17.2A at 116.8VAC
Video Streams: Max Number of Active Video Streams: 1
Video Preview Images: Video Preview Image Format: JPEG (accessed over HTTP)
Max Number of Video Preview Images:10
Min Refresh Time of Preview Images: 2 sec
Video Input: HDMI, DVI, RGBHV, S-Video, composite or component video
Video Input Resolutions: Video Input Resolutions supported by Firmware v2.1.28 or higher:
HDMI/DVI: 1024 x 768p @ 60 Hz, 720 x 480i @ 60 Hz,
720 x 480p @ 60 Hz
PAL: 576i, 576p @ 50 Hz
NTSC: 480i, 480p @ 60 Hz
Video Input Resolutions supported by Firmware versions previous to
HDMI/DVI: 640 x 480p @ 60 Hz, 800 x 600p @ 60 Hz,
1024 x 768p @ 60 Hz,1280 x 720p @ 60 Hz
PAL: 576i, 576p@50 Hz
NTSC: 480i, 480p@60 Hz
Video Input Resolutions not supported:
1280 x 768p @ 60 Hz, 1920 x 1080p @ 60 Hz
Video Output: Up to 720p @ 30 fps over IP (Matches input resolution)
Communications: 10/100 port, RJ-45 connector with Ethernet/IP pass-through
Audio Input: Unbalanced 1/8th-inch mini-jack connector (for use with non-HDMI
audio only)
Front Components:
Power LED: Lights green when device is receiving power.
Video Input
Diag Out
Audio In (not used)
2-pin Connector Output
Ethernet In
Ethernet Out
Power Input
Video Input
Video Outpu
Factory Reset
(to Touch Panel)
Status LED: Toggles on/off green every 5 seconds if communicating to the
panel.(i.e.: the panel is configured to use the MXA-MPL).
Video Input LED: Lights red when receiving video signals.
LAN LED: Lights green when the LAN connection is enabled.
Panel LED: Lights green when device is connected to a panel.
Video Output LED: Lights red when sending a video stream to a touch panel.
Reset button: Reboots the device when pressed.
Factory Reset button: Resets the unit to factory defaults when pressed for at least 5 sec-
Rear Components:
Video Input: DVI-I multi-format video input
Diag Out: HDMI diagnostics output (720p only).
Audio In: 1/8th-inch mini-jack input (for use with non-HDMI audio only)
2-Pin Connector Output: 2-pin 3.5 mm Phoenix-style connector output, 12 Volts, 3 Amps
Ethernet In: 10/100 port, RJ-45 connector for Ethernet connection to network.
Ethernet Out: 10/100 port, RJ-45 connector for Ethernet connection to touch panel.
Power Input: IEC power cord connector
100-240V AC
Operating Environment: Temperature (Operating): 32° F to 104° F (0° C to 40° C)
Temperature (Storage): 4° F to 140° F (-20° C to 60° C)
Humidity (Operating): 20% to 85% RH
Humidity (Storage): 5% to 85% RH
Power (“Heat”) Dissipation: 232 BTU/hr
Dimensions: 1 9/16” x 8 1/4” x 7 3/16” (4 cm x 21 cm x 18.2 cm)
Weight: 2.80 lbs (1.27 kg)
Certifications: UL
FCC Part 15 Class A
CE EN 55022 Class A and EN 55024
CB Scheme IEC 60950-1
Included Accessories: MXA-MPL Installation Guide (93-5968-10)
MIC AC Universal Power Cord (CA1090-131)
Other AMX Equipment: MPA-VRK, Rack Shelf 1RU 7.3" Depth (FG5968-30)
AC-SMB, Surface Mount Bracket Accessory (FG525)
CC-DVI-5BNCM, DVI to 5 BNC Male Cable 6' (FG10-2170-08)
CC-DVI-RCA3M, DVI to 3 RCA Male Cable 6' (FG10-2170-09)
CC-DVIM-VGAF, DVI to HD-15 Female Adapter (FG10-2170-13)
CC-DVI-SVID, DVI to S-Video Cable (FG10-2170-10)
CC-3.5ST5-RCA2F, 5-pin 3.5mm Phoenix-style to 2 RCA Female
Cable (FG10-003-20)

Vraag over de AMX MXA-MPL?

Wanneer u een vraag heeft over de "AMX MXA-MPL" kunt u die hier stellen. Zorg voor een duidelijke omschrijving van uw probleem zodat andere gebruikers en/of de redactie u van een passend antwoord kunnen voorzien.

Koop gerelateerde producten:

Product specificaties

Gewicht en omvang
Breedte 210 mm
Diepte 182 mm
Hoogte   40 mm
Gewicht   1428.816 g
Ondersteunde video-modi 1080p, 480i, 480p, 576i, 576p, 720p
Maximale videoresolutie 1920 x 1080
Poorten & interfaces
Hostinterface   DVI
Output interface HDMI
Eisen aan de omgeving
Temperatuur, in bedrijf 0 - 40 °C
Temperatuur bij opslag -20 - 60 °C
Relatieve luchtvochtigheid, in bedrijf   20 - 85
Luchtvochtigheid bij opslag   5 - 85
Externe adapter yes
Ingangsspanning 12 V
Werkzame stroming 3 A
Overige specificaties
Kleur van het product Zwart