Εγχειρίδιο Casio Twin Sensor SGW100B-3V

Casio Twin Sensor SGW100B-3V
(2)
  • Αριθμός σελίδων: 5
  • Τύπος αρχείου: PDF

Operation Guide 3157

1
MO1105-EC

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of yourpurchase, be sure to read this manual carefully.ApplicationsThe built-in sensors of this watch measure direction and temperature. Measuredvalues are then shown on the display. Such features make this watch useful whenhiking, mountain climbing, or when engaging in other such outdoor activities.Warning!The measurement functions built into this watch are not intended for use in takingmeasurements that require professional or industrial precision. Values producedby this watch should be considered as reasonably accurate representations only.When engaging in mountain climbing or other activities in which losing your waycan create a dangerous or life-threatening situation, always be sure to use asecond compass to confirm direction readings.Note that CASIO COMPUTER CO., LTD. assumes no responsibility for anydamage or loss suffered by you or any third party arising through the use of thisproduct or its malfunction.About This ManualDepending on the model of your watch, display textappears either as dark figures on a light background orlight figures on a dark background. All sample displaysin this manual are shown using dark figures on a lightbackground.Button operations are indicated using the letters shownin the illustration.Each section of this manual provides you with theinformation you need to perform operations in eachmode. Further details and technical information can befound in the “Reference” section.
(Light)
(Light)
General Guide
The illustration below shows which buttons you need to press to navigate between
modes.
In any mode (except when a setting screen is on the display), press B to illuminate
the display.
You can enter the Digital Compass/Thermometer Mode from the Timekeeping Mode
by pressing D. To enter from another mode, first use C to enter the Timekeeping
Mode, and then press D.
Stopwatch Mode
World Time Mode
Countdown Timer
Mode
Alarm Mode
Press C.
Timekeeping Mode
Digital Compass/
Thermometer Mode
Press D.
Press C.
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date!
This watch is preset with a number of city codes, each of
which represents the time zone where that city is located.
When setting the time, it is important that you first select
the correct city code for your Home City (the city where
you normally use the watch). If your location is not
included in the preset city codes, select the preset city
code that is in the same time zone as your location.
Note that all of the times for the World Time Mode city
codes are displayed in accordance with the time and
date settings you configure in the Timekeeping Mode.
Day of week
Month – Day
Hour : Minutes
Seconds
To set the time and date
1. In the Timekeeping Mode, hold down A until the city code starts to flash, which
indicates the setting screen.
2. Use D and B to select the city code you want.
Make sure you select your Home City code before changing any other setting.
For full information on city codes, see the “City Code Table”.
3. Press C to move the flashing in the sequence shown below to select the other
settings.
Second
Hour
12/24-Hour
Format
Minute
Year
Month
Day
Temperature
Unit
City Code
DST
The following steps explain how to configure timekeeping settings only.
4. When the timekeeping setting you want to change is flashing, use D and/or B to
change it as described below.
To do this:
Change the city code
Toggle between Daylight Saving Time
(
) and Standard Time ( ).
Toggle between 12-hour (
12H
) and
24-hour (
24H
) timekeeping.
Reset the seconds to
00
Change the hour or minute
Do this:
Use D (east) and B
(west).
Press D.
Press D.
Press D.
Use D (+) and B (–).
Screen
5. Press A to exit the setting screen.
For details about configuring temperature display settings, see “To specify the
temperature display unit”.
See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
Use D (+) and B (–).Change the year
Change the month or day
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (
ON
displayed) and Standard Time (OFF displayed).
4. Press A to exit the setting screen.
The DST indicator appears to indicate that Daylight
Saving Time is turned on.
DST indicator
On/Off status
Digital Compass/Thermometer
You can take direction readings and temperature readings in the Digital Compass/
Thermometer Mode.
Direction readings are taken by the watch’s built-in magnetic bearing sensor and
displayed as one of 16 directions. A temperature sensor is used for temperature
readings.
See “Digital Compass” for more information about the digital compass.
See “Thermometer” for more information about the thermometer.
To enter and exit the Digital Compass/Thermometer Mode
1. While in the Timekeeping Mode, press D to enter the
Digital Compass/Thermometer Mode.
The watch will start to take direction and temperature
readings. After about two seconds, the direction that
the 12 o’clock position of the watch is facing will be
indicated and the current temperature reading will
appear on the display.
Direction readings will be taken each second for about
10 seconds, and then stop automatically.
Temperature readings will be taken every two
seconds for about 10 seconds, and then stop
automatically.
To perform direction and temperature readings for
another 10 seconds, press D again.
2. Press C to return to the Timekeeping Mode.
For information about using the digital compass, see “To
take a direction reading”.
For information about using the thermometer, see “To
take a temperature reading”.
12 o’clock position
Current time
During readings
About two
seconds
Thermometer
The watch takes temperature readings automatically whenever you enter the Digital
Compass/Thermometer Mode. In addition, you can take readings manually by
performing the procedure below.
You can calibrate the temperature sensor if you think readings are wrong for some
reason.
You can select either Celsius (°C) or Fahrenheit (°F) as the temperature unit.
Casio Twin Sensor SGW100B-3V

Χρειάζεστε βοήθεια?

Αριθμός ερωτήσεων: 0

Έχετε κάποια ερώτηση σχετικά με το Casio Twin Sensor SGW100B-3V ή χρειάζεστε βοήθεια; Κάντε την ερώτησή σας εδώ. Δώστε μια σαφή και περιεκτική περιγραφή του ζητήματος και της ερώτησής σας. Όσο περισσότερες λεπτομέρειες παρέχετε για το ζήτημα και την ερώτησή σας, τόσο πιο εύκολο θα είναι για άλλους αγοραστές του Casio Twin Sensor SGW100B-3V να απαντήσουν σωστά στην ερώτησή σας.

Δείτε το εγχειρίδιο για το Casio Twin Sensor SGW100B-3V εδώ, δωρεάν. Αυτό το εγχειρίδιο ανήκει στην κατηγορία Αθλητικά Ρολόγια και έχει βαθμολογηθεί από 2 άτομα με μέσο όρο 9.5. Αυτό το εγχειρίδιο διατίθεται στις ακόλουθες γλώσσες: Αγγλικά. Έχετε κάποια ερώτηση σχετικά με το Casio Twin Sensor SGW100B-3V ή χρειάζεστε βοήθεια; Κάντε την ερώτησή σας εδώ

Casio Twin Sensor SGW100B-3V προδιαγραφές

Γενικά
Μάρκα Casio
Μοντέλο Twin Sensor SGW100B-3V
Προϊόν Αθλητικό Ρολόι
EAN 163120608492, 79767898489, 797678984892
Γλώσσα Αγγλικά
Τύπος αρχείου PDF
Τεχνικές λεπτομέρειες
Ημερολόγιο Ναι
Λειτουργία ρολογιού 12 ώρες/24 ώρες
Χρονόμετρο Ναι
Ακρίβεια +/-20 δευτερόλεπτα/μήνα
Λειτουργία παγκόσμιας ώρας Ναι
Θερμόμετρο Ναι
Χρονοδιακόπτης 1min - 24h
Ηλεκτρονική πυξίδα Ναι
Είδος καντράν Καντράν LCD
Άλλα χαρακτηριστικά
Διαστάσεις, μετρικό σύστημα 51.5 x 47.6 x 13.2 mm
Χρώμα προϊόντος Μαύρος (Μαύρο)
Βάρος και διαστάσεις
Βάρος 53 g
Διαχείρηση ενέργειας
Τύπος μπαταρίας CR2025
Σχέδιο
Υλικό ταινίας Ύφασμα
προβολή περισσότερων

Συχνές Ερωτήσεις

Παρακάτω, θα βρείτε τις πιο συχνές ερωτήσεις σχετικά με το Casio Twin Sensor SGW100B-3V .

Δεν συμπεριλαμβάνεται η ερώτησή σας; Κάντε την ερώτησή σας εδώ