Εγχειρίδιο Casio Twin Sensor SGW300H-1AV

Casio Twin Sensor SGW300H-1AV
(1)
  • Αριθμός σελίδων: 5
  • Τύπος αρχείου: PDF

Operation Guide 3202

1
Congratulations upon your selection of this CASIO watch.
Applications
The built-in sensors of this watch measure barometric pressure, temperature and
altitude. Measured values are then shown on the display. Such features make this
watch useful when hiking, mountain climbing, or when engaging in other such outdoor
activities.
Warning !
The measurement functions built into this watch are not intended for taking
measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonable representations only.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of
this product or its malfunction.

About This Manual

Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
Button operations are indicated using the letters shown
in the illustration.
Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To configure Home City settings” to configure your Home
City and daylight saving time settings.
Important!
Proper World Time Mode data depend on correct Home City, time, and date settings
in the Timekeeping Mode. Make sure you configure these settings correctly.
2. Set the current time.
See “Configuring Current Time and Date Settings”.
The watch is now ready for use.

Mode Reference Guide

Your watch has 7 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode:
View the current time and date in the Home City
Configure Home City and daylight saving time (DST) settings
Configure time and date settings
Timekeeping Mode
View the barometric pressure and temperature at your
current location
Barometer/Thermometer
Mode
View the altitude at your current location
Determine the altitude differential between two locations
(reference point and current location)
Altimeter Mode
View the current time in one of 48 cities (31 time zones)
around the globe
World Time Mode
Use the stopwatch to measure elapsed time Stopwatch Mode
Use the countdown timer Countdown Timer Mode
Set an alarm time Alarm Mode
MO1004-EB
Selecting a Mode
The illustration below shows which buttons you need to press to navigate between
modes.
In any mode (except when a setting screen, with flashing digits is on the display),
press
B
to illuminate the display.
World Time
Mode
Barometer/
Thermometer Mode
Stopwatch Mode
Countdown
Timer Mode
Alarm Mode
Altimeter Mode
Timekeeping Mode
World Time
Mode
Barometer/
Thermometer Mode
Stopwatch Mode
Countdown
Timer Mode
Alarm Mode
Altimeter Mode
Timekeeping Mode
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
The watch returns to the Timekeeping Mode automatically if you do not perform any
button operation for two or three minutes in the Alarm Mode.
The watch will return to the Timekeeping Mode automatically if you do not perform
any operation for about one hour after entering the Barometer/Thermometer Mode.
If you leave a setting screen with flashing digits on the display for two or three minutes
without performing any operation, the watch exits the setting screen automatically.
Initial Screens
When you enter the World Time Mode or Alarm Mode, the data you were viewing
when you last exited the mode appears first.
Scrolling
The
B
and
D
buttons are used on the setting screen to scroll through data on the
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.

Timekeeping

Use the Timekeeping Mode to set and view the current
time and date.
In the Timekeeping Mode, the graphic in the center of
the display indicates the passage of seconds.
PM
indicator
Day of
week
Month
Day
Seconds
Graphi
c
Hour : Minutes
PM
indicator
Day of
week
Month
Day
Seconds
Graphi
c
Hour : Minutes

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down
A
until the
currently selected city code (Home City) starts to flash.
This is the city code setting screen.
Before the city code starts to flash, the message
SET Hold will appear on the display. Keep
A
depressed until SET Hold disappears and the city
code starts to flash.
The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
For details about city codes, see the “City Code
Table”.
2. Press
D
(East) and
B
(West) to select the city code
you want to use as your Home City.
Keep pressing
D
or
B
until the city code you want
to select as your Home City appears on the display.
3. Press
C
to display the DST setting screen.
4.
Press
D
to toggle between Daylight Saving Time (On)
and Standard Time (OFF).
Note that you cannot switch between standard
time and daylight saving time (DST) while UTC is
selected as your Home City.
5.
After all the settings are the way you want, press
A
to return to the Timekeeping Mode.
The DST indicator appears to indicate that Daylight Saving Time is turned on.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current
time in your Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
PM
indicator
City
code
Second
s
Hour : Minutes
PM
indicator
City
code
Second
s
Hour : Minutes
Setting
DST indicator
Setting
DST indicator
Casio Twin Sensor SGW300H-1AV

Χρειάζεστε βοήθεια?

Αριθμός ερωτήσεων: 0

Έχετε κάποια ερώτηση σχετικά με το Casio Twin Sensor SGW300H-1AV ή χρειάζεστε βοήθεια; Κάντε την ερώτησή σας εδώ. Δώστε μια σαφή και περιεκτική περιγραφή του ζητήματος και της ερώτησής σας. Όσο περισσότερες λεπτομέρειες παρέχετε για το ζήτημα και την ερώτησή σας, τόσο πιο εύκολο θα είναι για άλλους αγοραστές του Casio Twin Sensor SGW300H-1AV να απαντήσουν σωστά στην ερώτησή σας.

Δείτε το εγχειρίδιο για το Casio Twin Sensor SGW300H-1AV εδώ, δωρεάν. Αυτό το εγχειρίδιο ανήκει στην κατηγορία Αθλητικά Ρολόγια και έχει βαθμολογηθεί από 1 άτομα με μέσο όρο 9.7. Αυτό το εγχειρίδιο διατίθεται στις ακόλουθες γλώσσες: Αγγλικά. Έχετε κάποια ερώτηση σχετικά με το Casio Twin Sensor SGW300H-1AV ή χρειάζεστε βοήθεια; Κάντε την ερώτησή σας εδώ

Casio Twin Sensor SGW300H-1AV προδιαγραφές

Γενικά
Μάρκα Casio
Μοντέλο Twin Sensor SGW300H-1AV
Προϊόν Αθλητικό Ρολόι
EAN 163120539932, 79767474102, 797674741024
Γλώσσα Αγγλικά
Τύπος αρχείου PDF
Τεχνικές λεπτομέρειες
Αδιάβροχο Ναι
Ανθεκτικό στο νερό σε βάθος 100 m
Ημερολόγιο Ναι
Λειτουργία ρολογιού 12 ώρες/24 ώρες
Χρονόμετρο Ναι
Ακρίβεια +/- 30 δευτερόλεπτα/μήνα
Λειτουργία παγκόσμιας ώρας Ναι
Βαρόμετρο Ναι
Αλτίμετρο Ναι
Χρονοδιακόπτης 1min - 24h
Θερμόμετρο Ναι
Είδος καντράν Καντράν LCD
Άλλα χαρακτηριστικά
Διαστάσεις, μετρικό σύστημα 49.2 x 50 x 14.1 mm
Χρώμα προϊόντος Μαύρος (Μαύρο)
Βάρος και διαστάσεις
Βάρος 47 g
Σχέδιο
Υλικό ταινίας Ρητίνη
Διαχείρηση ενέργειας
Τύπος μπαταρίας CR2016
προβολή περισσότερων

Συχνές Ερωτήσεις

Παρακάτω, θα βρείτε τις πιο συχνές ερωτήσεις σχετικά με το Casio Twin Sensor SGW300H-1AV .

Δεν συμπεριλαμβάνεται η ερώτησή σας; Κάντε την ερώτησή σας εδώ